Lomas Bayas Copper Mine, Chile

he Lomas Bayas copper mine is in the Atacama Desert of north Chile in the San Cristobal mountains. The mine is at an elevation of 1,500m and lies approximately 110km northeast of the coastal port of Antofagasta. The mine has a workforce of around 390 people. Developed by Westmin Resources Ltd, which spent some $244m on the property, Lomas Bayas was then bought by Boliden before being sold again, this time to Falconbridge, in mid-2001 for $175m. In mid-2006, Xstrata plc bought Falconbridge, with Lomas Bayas now being operated within its copper division. GEOLOGY AND RESERVES The Lomas Bayas orebody is hosted by upper cretaceous volcanic-arc rocks and associated back-arc sediments, which are intruded by an upper cretaceous-paleocene composite granodiorite batholith. The orebody is generally oxidised with a few zones of mixed oxide-sulphide. Copper mineralisation occurs in an irregular concentric zone around a low grade, hydrothermally-altered centre. At the end of 2005, proven and probable reserves at Lomas Bayas totalled 239.2Mt grading 0.36% copper with measured-plus-indicated resources adding up to a further 280.6Mt at 0.28% copper. Inferred resources were 31Mt at 0.3% copper. Lomas Bayas II, as Fortuna de Cobre had been renamed, had a measured-plus-indicated resource of 470.3Mt at 0.29% copper plus 150Mt at 0.21% copper in the inferred resource category. OPEN-PIT MINING Lomas Bayas currently operates one open-pit mine. The orebody has been explored to a depth of 300m and consists of five main mineralised zones structurally controlled by faulting: the Tirana, Candelaria, Andacolla, East and Gordo zones. Key items of open-pit equipment include a P&H 100XP blasthole rig and two P&H 2800XPB electric shovels. Heap-leach grade ore is crushed and placed on leach pads by a series of portable conveyors and a stacking system. Lower-grade, run-of-mine ore is placed directly on separate pads by mine haulage trucks. The mine completed a crusher expansion programme in 2004, increasing its capacity to 36,000t/d of ore. ORE PROCESSING The copper is recovered directly from the ore using a solvent extraction-electrowinning (SX-EW) process. Crushed ore is placed in low heaps built on sloping, impermeable pads for heap leaching and the metal dissolved by repeated application of sulphuric acid solutions. The pregnant solution is collected for copper recovery by electrowinning. Uncrushed run-of-mine ore is leached on separate pads with the pregnant solution also being transferred to the electrowinning circuit. The copper-bearing leacheates are purified by removing metals other than copper using organic solvents, and the copper is then extracted by electrowinning to produce high-quality copper cathodes. These are then transported 120km by truck and rail to the port at Antofagasta for shipment worldwide. PRODUCTION Lomas Bayas was commissioned in mid-1998, when 19,300t of copper were recovered from 2.6Mt of ore mined. Initially, Lomas Bayas experienced considerable difficulty in reaching design capacity owing to higher-than-anticipated levels of chlorides and nitrates that depressed SX performance. After some modifications and a change of SX reagent, Boliden raised output by 16% in 2000. In 2001 performance continued to improve, output totalling 56,300t of copper. The mine produced 62,041t of copper in 2004, a new record and nearly 2,000t more than in 2003. In 2005, its output rose again, to 63,147t. This involved the production and leaching of 13.5Mt of 0.5% copper ore in the heap-leach operation, and 22.4 Mt at 0.22% copper of run-of-mine ore. In March 2004 CMFLB announced a plan to leach copper from dust collected at Noranda's Alto Norte smelter and recover it in the SX-EW facilities. This could add up to 5,000t/y to copper production. ENVIRONMENT Lomas Bayas’ location in the Atacama Desert means that the principal environmental issues are dust control and water management. Water is pumped 135km to the site and the mine has maximised water recycling and conservation. Dust emissions are regularly monitored, the source identified and control strategies devised and implemented. EXPANSION Falconbridge had an option on the Fortuna de Cobre property, adjacent to Lomas Bayas, that had to be exercised by mid-2006. It began a pre-feasibility study during 2005, as well as driving an exploration tunnel into the orebody for bulk sampling purposes. It also built a pilot plant for metallurgical testwork. Mining here would potentially increase the copper output at Lomas Bayas from 60,000t/y to 90,000t/y, or extend the mine’s life by five years to 2020.		Map showing the location of Lomas Bayas and Fortuna de Cobre.
		P&H has also supplied a 100XP blasthole drill to Lomas Bayas.
		Open-pit mining at Lomas Bayas.
		A P&H 2800XPB electric mining shovel, as used at Lomas Bayas.
		The Fortuna de Cobre copper prospect.
		Leachable copper ore from Fortuna de Cobre.